W33×221 Beam Dimensions & Properties
W Shapes (AISC) · W33: 33 in nominal depth
W33×221 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 33.9 in (861.1 mm) deep with a 15.8 in (401.3 mm) flange, a 0.775 in (19.7 mm) web and a 1.28 in (32.5 mm) flange, and weighs 221 lb/ft (328.9 kg/m). Area 65.3 in² (42,129 mm²); strong-axis Ix = 12,900 in⁴ (536,938.5 cm⁴), Sx = 759 in³ (12,437.8 cm³), Zx = 857 in³ (14,043.7 cm³).
- dDepth
- 861.1 mm33.9 in33.9 in861.1 mm
- bfFlange width
- 401.3 mm15.8 in15.8 in401.3 mm
- twWeb thickness
- 19.7 mm0.775 in0.775 in19.7 mm
- tfFlange thickness
- 32.5 mm1.28 in1.28 in32.5 mm
Drawing
W33×221 specifications
| dDepth | 33.9 in861.1 mm |
|---|---|
| bfFlange width | 15.8 in401.3 mm |
| twWeb thickness | 0.775 in19.7 mm |
| tfFlange thickness | 1.28 in32.5 mm |
| kDesign value | 2.06 in52.3 mm |
| kDetailing value | 2 1/2 in63.5 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 221 lb/ft328.9 kg/m |
| AArea | 65.3 in²42,129 mm² |
| IxMoment of inertia, strong axis | 12,900 in⁴536,938.5 cm⁴ |
| ZxPlastic modulus, strong axis | 857 in³14,043.7 cm³ |
| SxSection modulus, strong axis | 759 in³12,437.8 cm³ |
| rxRadius of gyration, strong axis | 14.1 in358.1 mm |
| IyMoment of inertia, weak axis | 840 in⁴34,963.4 cm⁴ |
| ZyPlastic modulus, weak axis | 164 in³2,687.5 cm³ |
| SySection modulus, weak axis | 106 in³1,737 cm³ |
| ryRadius of gyration, weak axis | 3.59 in91.2 mm |
| JTorsional constant | 27.8 in⁴1,157.12 cm⁴ |
| bf/2tfFlange slenderness | 6.2 |
| h/twWeb slenderness | 38.5 |
| Metric designation | W840×329 |
Also known as
W840×329
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.