W24×229 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×229 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 26 in (660.4 mm) deep with a 13.1 in (332.7 mm) flange, a 0.96 in (24.4 mm) web and a 1.73 in (43.9 mm) flange, and weighs 229 lb/ft (340.8 kg/m). Area 67.2 in² (43,355 mm²); strong-axis Ix = 7,650 in⁴ (318,417 cm⁴), Sx = 588 in³ (9,635.6 cm³), Zx = 675 in³ (11,061.3 cm³).

dDepth
660.4 mm26 in26 in660.4 mm
bfFlange width
332.7 mm13.1 in13.1 in332.7 mm
twWeb thickness
24.4 mm0.96 in0.96 in24.4 mm
tfFlange thickness
43.9 mm1.73 in1.73 in43.9 mm

Drawing

332.7 mm13.1 in660.4 mm26 intf 43.9 mmtf 1.73 intw 24.4 mmtw 0.96 ink 56.6 mmk 2.23 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×229 specifications

dDepth26 in660.4 mm
bfFlange width13.1 in332.7 mm
twWeb thickness0.96 in24.4 mm
tfFlange thickness1.73 in43.9 mm
kDesign value2.23 in56.6 mm
kDetailing value3 in76.2 mm
k1Detailing value1 11/16 in42.9 mm
WWeight229 lb/ft340.8 kg/m
AArea67.2 in²43,355 mm²
IxMoment of inertia, strong axis7,650 in⁴318,417 cm⁴
ZxPlastic modulus, strong axis675 in³11,061.3 cm³
SxSection modulus, strong axis588 in³9,635.6 cm³
rxRadius of gyration, strong axis10.7 in271.8 mm
IyMoment of inertia, weak axis651 in⁴27,096.7 cm⁴
ZyPlastic modulus, weak axis154 in³2,523.6 cm³
SySection modulus, weak axis99.4 in³1,628.9 cm³
ryRadius of gyration, weak axis3.11 in79.0 mm
JTorsional constant51.3 in⁴2,135.27 cm⁴
bf/2tfFlange slenderness3.79
h/twWeb slenderness22.5
Metric designationW610×341

Also known as

W610×341

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.