W33×201 Beam Dimensions & Properties
W Shapes (AISC) · W33: 33 in nominal depth
W33×201 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 33.7 in (856.0 mm) deep with a 15.7 in (398.8 mm) flange, a 0.715 in (18.2 mm) web and a 1.15 in (29.2 mm) flange, and weighs 201 lb/ft (299.1 kg/m). Area 59.1 in² (38,129 mm²); strong-axis Ix = 11,600 in⁴ (482,828.5 cm⁴), Sx = 686 in³ (11,241.5 cm³), Zx = 773 in³ (12,667.2 cm³).
- dDepth
- 856.0 mm33.7 in33.7 in856.0 mm
- bfFlange width
- 398.8 mm15.7 in15.7 in398.8 mm
- twWeb thickness
- 18.2 mm0.715 in0.715 in18.2 mm
- tfFlange thickness
- 29.2 mm1.15 in1.15 in29.2 mm
Drawing
W33×201 specifications
| dDepth | 33.7 in856.0 mm |
|---|---|
| bfFlange width | 15.7 in398.8 mm |
| twWeb thickness | 0.715 in18.2 mm |
| tfFlange thickness | 1.15 in29.2 mm |
| kDesign value | 1.94 in49.3 mm |
| kDetailing value | 2 7/16 in61.9 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 201 lb/ft299.1 kg/m |
| AArea | 59.1 in²38,129 mm² |
| IxMoment of inertia, strong axis | 11,600 in⁴482,828.5 cm⁴ |
| ZxPlastic modulus, strong axis | 773 in³12,667.2 cm³ |
| SxSection modulus, strong axis | 686 in³11,241.5 cm³ |
| rxRadius of gyration, strong axis | 14 in355.6 mm |
| IyMoment of inertia, weak axis | 749 in⁴31,175.7 cm⁴ |
| ZyPlastic modulus, weak axis | 147 in³2,408.9 cm³ |
| SySection modulus, weak axis | 95.2 in³1,560 cm³ |
| ryRadius of gyration, weak axis | 3.56 in90.4 mm |
| JTorsional constant | 20.8 in⁴865.76 cm⁴ |
| bf/2tfFlange slenderness | 6.85 |
| h/twWeb slenderness | 41.7 |
| Metric designation | W840×299 |
Also known as
W840×299
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.