W40×593 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×593 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 43 in (1092.2 mm) deep with a 16.7 in (424.2 mm) flange, a 1.79 in (45.5 mm) web and a 3.23 in (82.0 mm) flange, and weighs 593 lb/ft (882.5 kg/m). Area 174 in² (112,258 mm²); strong-axis Ix = 50,400 in⁴ (2,097,806.4 cm⁴), Sx = 2,340 in³ (38,345.7 cm³), Zx = 2,760 in³ (45,228.3 cm³).

dDepth
1092.2 mm43 in43 in1092.2 mm
bfFlange width
424.2 mm16.7 in16.7 in424.2 mm
twWeb thickness
45.5 mm1.79 in1.79 in45.5 mm
tfFlange thickness
82.0 mm3.23 in3.23 in82.0 mm

Drawing

424.2 mm16.7 in1092.2 mm43 intf 82.0 mmtf 3.23 intw 45.5 mmtw 1.79 ink 112.0 mmk 4.41 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×593 specifications

dDepth43 in1092.2 mm
bfFlange width16.7 in424.2 mm
twWeb thickness1.79 in45.5 mm
tfFlange thickness3.23 in82.0 mm
kDesign value4.41 in112.0 mm
kDetailing value4 1/2 in114.3 mm
k1Detailing value2 1/8 in54.0 mm
WWeight593 lb/ft882.5 kg/m
AArea174 in²112,258 mm²
IxMoment of inertia, strong axis50,400 in⁴2,097,806.4 cm⁴
ZxPlastic modulus, strong axis2,760 in³45,228.3 cm³
SxSection modulus, strong axis2,340 in³38,345.7 cm³
rxRadius of gyration, strong axis17 in431.8 mm
IyMoment of inertia, weak axis2,520 in⁴104,890.3 cm⁴
ZyPlastic modulus, weak axis481 in³7,882.2 cm³
SySection modulus, weak axis302 in³4,948.9 cm³
ryRadius of gyration, weak axis3.8 in96.5 mm
JTorsional constant445 in⁴18,522.3 cm⁴
bf/2tfFlange slenderness2.58
h/twWeb slenderness19.1
Metric designationW1000×883

Also known as

W1000×883

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.