W40×503 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×503 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 42.1 in (1069.3 mm) deep with a 16.4 in (416.6 mm) flange, a 1.54 in (39.1 mm) web and a 2.76 in (70.1 mm) flange, and weighs 503 lb/ft (748.5 kg/m). Area 148 in² (95,484 mm²); strong-axis Ix = 41,600 in⁴ (1,731,522.7 cm⁴), Sx = 1,980 in³ (32,446.4 cm³), Zx = 2,320 in³ (38,018 cm³).

dDepth
1069.3 mm42.1 in42.1 in1069.3 mm
bfFlange width
416.6 mm16.4 in16.4 in416.6 mm
twWeb thickness
39.1 mm1.54 in1.54 in39.1 mm
tfFlange thickness
70.1 mm2.76 in2.76 in70.1 mm

Drawing

416.6 mm16.4 in1069.3 mm42.1 intf 70.1 mmtf 2.76 intw 39.1 mmtw 1.54 ink 100.1 mmk 3.94 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×503 specifications

dDepth42.1 in1069.3 mm
bfFlange width16.4 in416.6 mm
twWeb thickness1.54 in39.1 mm
tfFlange thickness2.76 in70.1 mm
kDesign value3.94 in100.1 mm
kDetailing value4 in101.6 mm
k1Detailing value2 in50.8 mm
WWeight503 lb/ft748.5 kg/m
AArea148 in²95,484 mm²
IxMoment of inertia, strong axis41,600 in⁴1,731,522.7 cm⁴
ZxPlastic modulus, strong axis2,320 in³38,018 cm³
SxSection modulus, strong axis1,980 in³32,446.4 cm³
rxRadius of gyration, strong axis16.8 in426.7 mm
IyMoment of inertia, weak axis2,040 in⁴84,911.2 cm⁴
ZyPlastic modulus, weak axis394 in³6,456.5 cm³
SySection modulus, weak axis249 in³4,080.4 cm³
ryRadius of gyration, weak axis3.72 in94.5 mm
JTorsional constant277 in⁴11,529.61 cm⁴
bf/2tfFlange slenderness2.98
h/twWeb slenderness22.3
Metric designationW1000×748

Also known as

W1000×748

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.