W8×10 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×10 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 7.89 in (200.4 mm) deep with a 3.94 in (100.1 mm) flange, a 0.17 in (4.3 mm) web and a 0.205 in (5.2 mm) flange, and weighs 10 lb/ft (14.9 kg/m). Area 2.96 in² (1,910 mm²); strong-axis Ix = 30.8 in⁴ (1,282 cm⁴), Sx = 7.81 in³ (128 cm³), Zx = 8.87 in³ (145.4 cm³).

dDepth
200.4 mm7.89 in7.89 in200.4 mm
bfFlange width
100.1 mm3.94 in3.94 in100.1 mm
twWeb thickness
4.3 mm0.17 in0.17 in4.3 mm
tfFlange thickness
5.2 mm0.205 in0.205 in5.2 mm

Drawing

100.1 mm3.94 in200.4 mm7.89 intf 5.2 mmtf 0.205 intw 4.3 mmtw 0.17 ink 12.8 mmk 0.505 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×10 specifications

dDepth7.89 in200.4 mm
bfFlange width3.94 in100.1 mm
twWeb thickness0.17 in4.3 mm
tfFlange thickness0.205 in5.2 mm
kDesign value0.505 in12.8 mm
kDetailing value11/16 in17.5 mm
k1Detailing value1/2 in12.7 mm
WWeight10 lb/ft14.9 kg/m
AArea2.96 in²1,910 mm²
IxMoment of inertia, strong axis30.8 in⁴1,282 cm⁴
ZxPlastic modulus, strong axis8.87 in³145.4 cm³
SxSection modulus, strong axis7.81 in³128 cm³
rxRadius of gyration, strong axis3.22 in81.8 mm
IyMoment of inertia, weak axis2.09 in⁴87 cm⁴
ZyPlastic modulus, weak axis1.66 in³27.2 cm³
SySection modulus, weak axis1.06 in³17.4 cm³
ryRadius of gyration, weak axis0.84 in21.4 mm
JTorsional constant0.043 in⁴1.77 cm⁴
bf/2tfFlange slenderness9.61
h/twWeb slenderness40.5
Metric designationW200×15

Also known as

W200×15

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.