W8×28 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×28 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8.06 in (204.7 mm) deep with a 6.54 in (166.1 mm) flange, a 0.285 in (7.2 mm) web and a 0.465 in (11.8 mm) flange, and weighs 28 lb/ft (41.7 kg/m). Area 8.25 in² (5,323 mm²); strong-axis Ix = 98 in⁴ (4,079.1 cm⁴), Sx = 24.3 in³ (398.2 cm³), Zx = 27.2 in³ (445.7 cm³).

dDepth
204.7 mm8.06 in8.06 in204.7 mm
bfFlange width
166.1 mm6.54 in6.54 in166.1 mm
twWeb thickness
7.2 mm0.285 in0.285 in7.2 mm
tfFlange thickness
11.8 mm0.465 in0.465 in11.8 mm

Drawing

166.1 mm6.54 in204.7 mm8.06 intf 11.8 mmtf 0.465 intw 7.2 mmtw 0.285 ink 21.8 mmk 0.859 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×28 specifications

dDepth8.06 in204.7 mm
bfFlange width6.54 in166.1 mm
twWeb thickness0.285 in7.2 mm
tfFlange thickness0.465 in11.8 mm
kDesign value0.859 in21.8 mm
kDetailing value15/16 in23.8 mm
k1Detailing value5/8 in15.9 mm
WWeight28 lb/ft41.7 kg/m
AArea8.25 in²5,323 mm²
IxMoment of inertia, strong axis98 in⁴4,079.1 cm⁴
ZxPlastic modulus, strong axis27.2 in³445.7 cm³
SxSection modulus, strong axis24.3 in³398.2 cm³
rxRadius of gyration, strong axis3.45 in87.6 mm
IyMoment of inertia, weak axis21.7 in⁴903.2 cm⁴
ZyPlastic modulus, weak axis10.1 in³165.5 cm³
SySection modulus, weak axis6.63 in³108.6 cm³
ryRadius of gyration, weak axis1.62 in41.1 mm
JTorsional constant0.537 in⁴22.35 cm⁴
bf/2tfFlange slenderness7.03
h/twWeb slenderness22.3
Metric designationW200×41.7

Also known as

W200×41.7

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.