W8×31 Beam Dimensions & Properties

W Shapes (AISC) · W8: 8 in nominal depth

W8×31 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 8 in (203.2 mm) deep with a 8 in (203.2 mm) flange, a 0.285 in (7.2 mm) web and a 0.435 in (11.0 mm) flange, and weighs 31 lb/ft (46.1 kg/m). Area 9.13 in² (5,890 mm²); strong-axis Ix = 110 in⁴ (4,578.5 cm⁴), Sx = 27.5 in³ (450.6 cm³), Zx = 30.4 in³ (498.2 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
203.2 mm8 in8 in203.2 mm
twWeb thickness
7.2 mm0.285 in0.285 in7.2 mm
tfFlange thickness
11.0 mm0.435 in0.435 in11.0 mm

Drawing

203.2 mm8 in203.2 mm8 intf 11.0 mmtf 0.435 intw 7.2 mmtw 0.285 ink 21.1 mmk 0.829 in
Drawn to scale · Dimensions in mmDimensions in inches

W8×31 specifications

dDepth8 in203.2 mm
bfFlange width8 in203.2 mm
twWeb thickness0.285 in7.2 mm
tfFlange thickness0.435 in11.0 mm
kDesign value0.829 in21.1 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight31 lb/ft46.1 kg/m
AArea9.13 in²5,890 mm²
IxMoment of inertia, strong axis110 in⁴4,578.5 cm⁴
ZxPlastic modulus, strong axis30.4 in³498.2 cm³
SxSection modulus, strong axis27.5 in³450.6 cm³
rxRadius of gyration, strong axis3.47 in88.1 mm
IyMoment of inertia, weak axis37.1 in⁴1,544.2 cm⁴
ZyPlastic modulus, weak axis14.1 in³231.1 cm³
SySection modulus, weak axis9.27 in³151.9 cm³
ryRadius of gyration, weak axis2.02 in51.3 mm
JTorsional constant0.536 in⁴22.31 cm⁴
bf/2tfFlange slenderness9.19
h/twWeb slenderness22.3
Metric designationW200×46.1

Also known as

W200×46.1

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.