W8×24 Beam Dimensions & Properties
W Shapes (AISC) · W8: 8 in nominal depth
W8×24 is an AISC wide-flange shape (W8: 8 in nominal depth). It is 7.93 in (201.4 mm) deep with a 6.5 in (165.1 mm) flange, a 0.245 in (6.2 mm) web and a 0.4 in (10.2 mm) flange, and weighs 24 lb/ft (35.7 kg/m). Area 7.08 in² (4,568 mm²); strong-axis Ix = 82.7 in⁴ (3,442.2 cm⁴), Sx = 20.9 in³ (342.5 cm³), Zx = 23.1 in³ (378.5 cm³).
- dDepth
- 201.4 mm7.93 in7.93 in201.4 mm
- bfFlange width
- 165.1 mm6.5 in6.5 in165.1 mm
- twWeb thickness
- 6.2 mm0.245 in0.245 in6.2 mm
- tfFlange thickness
- 10.2 mm0.4 in0.4 in10.2 mm
Drawing
W8×24 specifications
| dDepth | 7.93 in201.4 mm |
|---|---|
| bfFlange width | 6.5 in165.1 mm |
| twWeb thickness | 0.245 in6.2 mm |
| tfFlange thickness | 0.4 in10.2 mm |
| kDesign value | 0.794 in20.2 mm |
| kDetailing value | 7/8 in22.2 mm |
| k1Detailing value | 9/16 in14.3 mm |
| WWeight | 24 lb/ft35.7 kg/m |
| AArea | 7.08 in²4,568 mm² |
| IxMoment of inertia, strong axis | 82.7 in⁴3,442.2 cm⁴ |
| ZxPlastic modulus, strong axis | 23.1 in³378.5 cm³ |
| SxSection modulus, strong axis | 20.9 in³342.5 cm³ |
| rxRadius of gyration, strong axis | 3.42 in86.9 mm |
| IyMoment of inertia, weak axis | 18.3 in⁴761.7 cm⁴ |
| ZyPlastic modulus, weak axis | 8.57 in³140.4 cm³ |
| SySection modulus, weak axis | 5.63 in³92.3 cm³ |
| ryRadius of gyration, weak axis | 1.61 in40.9 mm |
| JTorsional constant | 0.346 in⁴14.4 cm⁴ |
| bf/2tfFlange slenderness | 8.12 |
| h/twWeb slenderness | 25.9 |
| Metric designation | W200×35.9 |
Also known as
W200×35.9
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.