M12 Washer Size: Inside and Outside Diameter

Flat Washers

An M12 flat washer (ISO 7089 / DIN 125) has a 13 mm (0.512 in) hole, a 24 mm (0.945 in) outside diameter and is 2.5 mm (0.098 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
13 mm0.512 in0.512 in13 mm
d₂Outside diameter
24 mm0.945 in0.945 in24 mm
hThickness
2.5 mm0.098 in0.098 in2.5 mm

Drawing

⌀13 mm⌀0.512 in⌀24 mm⌀0.945 in
h 2.5 mmh 0.098 in⌀24 mm⌀0.945 in⌀13 mm⌀0.512 in
Drawn to scale · Dimensions in mmDimensions in inches

M12 specifications

d₁Inside diameter13 mm0.512 in
d₂Outside diameter24 mm0.945 in
hThickness2.5 mm0.098 in
Outside diameter, large (ISO 7093)37 mm1.457 in
Thickness, large (ISO 7093)3 mm0.118 in

M12 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.