M18 Washer Size: Inside and Outside Diameter

Flat Washers

An M18 flat washer (ISO 7089 / DIN 125) has a 19 mm (0.748 in) hole, a 34 mm (1.339 in) outside diameter and is 3 mm (0.118 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
19 mm0.748 in0.748 in19 mm
d₂Outside diameter
34 mm1.339 in1.339 in34 mm
hThickness
3 mm0.118 in0.118 in3 mm

Drawing

⌀19 mm⌀0.748 in⌀34 mm⌀1.339 in
h 3 mmh 0.118 in⌀34 mm⌀1.339 in⌀19 mm⌀0.748 in
Drawn to scale · Dimensions in mmDimensions in inches

M18 specifications

d₁Inside diameter19 mm0.748 in
d₂Outside diameter34 mm1.339 in
hThickness3 mm0.118 in

M18 is a second-choice size; ISO 7093-1 lists no large-series washer for it.

M18 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.