M20 Washer Size: Inside and Outside Diameter

Flat Washers

An M20 flat washer (ISO 7089 / DIN 125) has a 21 mm (0.827 in) hole, a 37 mm (1.457 in) outside diameter and is 3 mm (0.118 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
21 mm0.827 in0.827 in21 mm
d₂Outside diameter
37 mm1.457 in1.457 in37 mm
hThickness
3 mm0.118 in0.118 in3 mm

Drawing

⌀21 mm⌀0.827 in⌀37 mm⌀1.457 in
h 3 mmh 0.118 in⌀37 mm⌀1.457 in⌀21 mm⌀0.827 in
Drawn to scale · Dimensions in mmDimensions in inches

M20 specifications

d₁Inside diameter21 mm0.827 in
d₂Outside diameter37 mm1.457 in
hThickness3 mm0.118 in
Outside diameter, large (ISO 7093)60 mm2.362 in
Thickness, large (ISO 7093)4 mm0.157 in

M20 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.