M2.5 Washer Size: Inside and Outside Diameter

Flat Washers

An M2.5 flat washer (ISO 7089 / DIN 125) has a 2.7 mm (0.106 in) hole, a 6 mm (0.236 in) outside diameter and is 0.5 mm (0.020 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
2.7 mm0.106 in0.106 in2.7 mm
d₂Outside diameter
6 mm0.236 in0.236 in6 mm
hThickness
0.5 mm0.020 in0.020 in0.5 mm

Drawing

⌀2.7 mm⌀0.106 in⌀6 mm⌀0.236 in
h 0.5 mmh 0.020 in⌀6 mm⌀0.236 in⌀2.7 mm⌀0.106 in
Drawn to scale · Dimensions in mmDimensions in inches

M2.5 specifications

d₁Inside diameter2.7 mm0.106 in
d₂Outside diameter6 mm0.236 in
hThickness0.5 mm0.020 in

M2.5 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.