M3 Washer Size: Inside and Outside Diameter

Flat Washers

An M3 flat washer (ISO 7089 / DIN 125) has a 3.2 mm (0.126 in) hole, a 7 mm (0.276 in) outside diameter and is 0.5 mm (0.020 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
3.2 mm0.126 in0.126 in3.2 mm
d₂Outside diameter
7 mm0.276 in0.276 in7 mm
hThickness
0.5 mm0.020 in0.020 in0.5 mm

Drawing

⌀3.2 mm⌀0.126 in⌀7 mm⌀0.276 in
h 0.5 mmh 0.020 in⌀7 mm⌀0.276 in⌀3.2 mm⌀0.126 in
Drawn to scale · Dimensions in mmDimensions in inches

M3 specifications

d₁Inside diameter3.2 mm0.126 in
d₂Outside diameter7 mm0.276 in
hThickness0.5 mm0.020 in
Outside diameter, large (ISO 7093)9 mm0.354 in
Thickness, large (ISO 7093)0.8 mm0.031 in

M3 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.