M4 Washer Size: Inside and Outside Diameter

Flat Washers

An M4 flat washer (ISO 7089 / DIN 125) has a 4.3 mm (0.169 in) hole, a 9 mm (0.354 in) outside diameter and is 0.8 mm (0.031 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
4.3 mm0.169 in0.169 in4.3 mm
d₂Outside diameter
9 mm0.354 in0.354 in9 mm
hThickness
0.8 mm0.031 in0.031 in0.8 mm

Drawing

⌀4.3 mm⌀0.169 in⌀9 mm⌀0.354 in
h 0.8 mmh 0.031 in⌀9 mm⌀0.354 in⌀4.3 mm⌀0.169 in
Drawn to scale · Dimensions in mmDimensions in inches

M4 specifications

d₁Inside diameter4.3 mm0.169 in
d₂Outside diameter9 mm0.354 in
hThickness0.8 mm0.031 in
Outside diameter, large (ISO 7093)12 mm0.472 in
Thickness, large (ISO 7093)1 mm0.039 in

M4 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.