M8 Washer Size: Inside and Outside Diameter

Flat Washers

An M8 flat washer (ISO 7089 / DIN 125) has a 8.4 mm (0.331 in) hole, a 16 mm (0.630 in) outside diameter and is 1.6 mm (0.063 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
8.4 mm0.331 in0.331 in8.4 mm
d₂Outside diameter
16 mm0.630 in0.630 in16 mm
hThickness
1.6 mm0.063 in0.063 in1.6 mm

Drawing

⌀8.4 mm⌀0.331 in⌀16 mm⌀0.630 in
h 1.6 mmh 0.063 in⌀16 mm⌀0.630 in⌀8.4 mm⌀0.331 in
Drawn to scale · Dimensions in mmDimensions in inches

M8 specifications

d₁Inside diameter8.4 mm0.331 in
d₂Outside diameter16 mm0.630 in
hThickness1.6 mm0.063 in
Outside diameter, large (ISO 7093)24 mm0.945 in
Thickness, large (ISO 7093)2 mm0.079 in

M8 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.