Yarn Weight Chart: CYC 0 Lace to 7 Jumbo

The Craft Yarn Council's Standard Yarn Weight System sorts yarn into eight categories, from 0 Lace to 7 Jumbo, by the gauge it knits to. The number on the yarn label tells you the needle and hook range: worsted (4 Medium) knits at 16–20 stitches per 4 in on 4.5–5.5 mm (US 7–9) needles.

8 weight categoriesChecked 2026-11-155 sources
02468101214160 LaceLace1 Super FineSock2 FineSport3 LightDK4 MediumWorsted5 BulkyChunky6 Super BulkySuper bulky7 JumboJumboKnitting needleCrochet hookmm
CYC recommended knitting needle and crochet hook sizes in millimetres.Drawn to scale

Yarn weight chartTap a category for gauge, needles and hooks

8 of 8
CategoryYarn types (US)UK / AU namesKnit gauge, sts per 4 in / 10 cmKnitting needlemmNeedle, US sizesCrochet hookmm
0 LaceLace, fingering 10-count crochet thread1–2 ply, cobweb, lace33–401.5–2.25000 to 11.4–2.25
1 Super FineSock, fingering, baby3–4 ply, fingering27–322.25–3.251 to 32.25–3.5
2 FineSport, baby5 ply, sport23–263.25–3.753 to 53.5–4.5
3 LightDK, light worstedDK, 8 ply21–243.75–4.55 to 74.5–5.5
4 MediumWorsted, afghan, aranAran, 10 ply16–204.5–5.57 to 95.5–6.5
5 BulkyChunky, craft, rugChunky, 12 ply12–155.5–89 to 116.5–9
6 Super BulkySuper bulky, rovingSuper chunky, 14 ply7–118–12.7511 to 179–15
7 JumboJumbo, rovingJumbo, ultra chunky6 or fewer12.75 mm and larger17 and larger15 mm and larger

How to read a yarn label

Look for the skein symbol with a number 0–7: that is the CYC category. Next to it most labels show a gauge square, for example 20 sts × 26 rows = 4 in (10 cm) on US 7 (4.5 mm) needles. The gauge is the manufacturer's recommendation and usually falls inside the CYC range, but the gauge square on the label is more precise than the category.

Names differ by country. The UK and Australia name yarn by ply (4 ply, 8 ply, 10 ply, 12 ply), which once meant the number of strands but now simply means a thickness class: 8 ply = DK, 10 ply ≈ worsted/aran, 4 ply = fingering. 'Aran' and 'worsted' overlap; aran is slightly heavier.

Wraps per inch (WPI) identifies an unlabeled yarn: wrap it around a ruler or pencil, strands touching but not squashed, and count the wraps in one inch. Compare with the chart, then knit a swatch, because WPI only narrows it down to a category.

The ranges are guides. Gauge depends on the knitter, the fiber and the stitch pattern; always swatch and change needle size until you match the pattern's gauge.

About Yarn Weights

Yarn 'weight' means thickness, not how much a ball weighs. The CYC system was introduced so that US patterns and labels describe yarn the same way. It is defined by gauge ranges in stockinette (knitting) and single crochet, and by the needle and hook sizes that usually produce them. Thicker yarn means fewer stitches per inch, larger needles and faster knitting.

Yardage per weight is the other number on the label. For the same fiber, thinner yarn has more length per gram: wool fingering is often around 400 m per 100 g, DK around 225 m, worsted around 200 m, bulky around 100 m. When substituting a yarn, match the category and the meters per 100 g; if those agree, the fabric will be close.

Industry uses linear density instead of names. Tex is grams per 1000 m, denier grams per 9000 m, Nm (metric count) metres per gram, Ne (English cotton count) the number of 840-yard hanks per pound. The converter below translates between them and to meters or yards per 100 g.

Yarn count units

tex = g per 1000 m. dtex (decitex) = g per 10 000 m = 10 × tex; synthetic filaments are usually given in dtex. denier = g per 9000 m = 9 × tex; used for silk and nylon (a 15-denier stocking). Nm = m per g = 1000 / tex; a 2/28 Nm yarn is two plies of Nm 28, giving Nm 14 (71 tex). Ne (cotton count) = 590.5 / tex; Ne 30 is 19.7 tex. Nw (worsted count, 560-yard hanks per pound) = 885.8 / tex.

For a hand-knitting yarn, m per 100 g = 100 000 / tex. A worsted at 200 m per 100 g is 500 tex, Nm 2.

Thread and lace

Category 0 includes fine crochet thread, which has its own number system (size 10 thread is the common 'bedspread' weight; a higher number is finer). It is worked with steel hooks of 1.4–1.6 mm. CYC gives the lace crochet gauge in double crochet (32–42 dc per 4 in), because single crochet is rarely used at this scale.

Questions

What is the difference between DK and worsted?

DK (CYC 3 Light) knits at 21–24 sts per 4 in on 3.75–4.5 mm needles; worsted (CYC 4 Medium) at 16–20 sts on 4.5–5.5 mm. Worsted is noticeably thicker. DK is the same as 8 ply.

What weight is 8 ply yarn?

8 ply (Australia and New Zealand) is DK, CYC category 3 Light. 10 ply is roughly worsted/aran (category 4), 12 ply is chunky (category 5), 4 ply is fingering (category 1).

What needle size do I use for worsted yarn?

4.5–5.5 mm (US 7–9) according to the CYC; 5 mm (US 8) is the most common label recommendation. Change the size until you match your pattern's gauge.

How do I find the weight of an unlabeled yarn?

Wrap it around a ruler for one inch, strands side by side without gaps or overlap, and count the wraps: about 14 = fingering, 12 = sport, 11 = DK, 8–9 = worsted/aran, 7 = bulky, 5–6 = super bulky. Then knit a swatch to confirm.

How do I convert denier to tex?

Divide by 9: 90 denier = 10 tex. Tex is grams per 1000 m, denier grams per 9000 m. Nm (metres per gram) is 1000 divided by tex.

Sources

  1. Craft Yarn Council: Standard Yarn Weight System
  2. Craft Yarn Council: Standards & Guidelines for Crochet and Knitting (PDF)
  3. Craft Yarn Council: How to measure wraps per inch
  4. Ravelry: Yarn weights (help page, WPI per weight)
  5. ISO 1144 / ISO 2947: Textiles: universal system for designating linear density (Tex System)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.