9 AWG Wire Size

AWG Wire Gauge

9 AWG solid wire is 0.1144 in (2.906 mm) in diameter, with a copper cross-section of 6.634 mm² (13,090 circular mils). Solid annealed copper of this size has a DC resistance of 2.599 Ω/km (0.7921 Ω/1000 ft) at 20 °C.

dDiameter
2.906 mm0.1144 in0.1144 in2.906 mm
ACross-section
6.634 mm²
RDC resistance, copper 20 °C
2.599 Ω/km

Drawing

⌀2.906 mm⌀0.1144 inSolid6.634 mm²
⌀3.295 mm⌀0.1297 in7 × ⌀1.098 mm⌀0.0432 in7 strands, same area
Bare conductor without insulation; 7-strand shown as an uncompressed concentric lay.Drawn to scale · Dimensions in mmDimensions in inches

9 AWG specifications

dDiameter0.1144 in2.906 mm
ACross-section6.634 mm²
Circular mils13,090
RDC resistance, copper 20 °C2.599 Ω/km
RDC resistance, copper 20 °C0.7921 Ω/1000 ft
Next metric size up10 mm²

Also known as

#9

Metric (IEC 60228) size with at least the same area

All AWG Wire Gauge sizes

Compare all 44 sizes in the AWG Wire Gauge chart →

Sources

  1. ASTM B258: Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  2. NFPA 70, National Electrical Code (2023), Table 310.16: Ampacities of insulated conductors, 60/75/90 °C
  3. IEC 60028:1925, International standard of resistance for copper (annealed copper: 1/58 Ω·mm²/m at 20 °C)
  4. IEC 60228:2023, Conductors of insulated cables (metric nominal cross-sections)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.