Bicycle Chain Widths by Speed and Freehub Standards: HG, XD, Micro Spline, N3W
Every bicycle chain has a 1/2 in (12.7 mm) pitch. They differ in width: 1/8 in inner width for single-speed and hub-gear bikes, 3/32 in for derailleurs. Outer width shrinks with the number of cogs: about 7.1 mm (8-speed), 5.9 mm (10s), 5.5 mm (11s), 5.2 mm (12s). The cassette must match the freehub: Shimano HG, Micro Spline, SRAM XD/XDR or Campagnolo.
Size chartSort by any column, or filter to find a row
| Chain / freehub | wInner width (nominal)mmin | WOuter width (typical)mmin | Cassette speeds | Smallest cog (teeth) | Use / notes |
|---|---|---|---|---|---|
| Chains by speed | |||||
| Single speed 1/8 in | 3.180.125 | 9.5–10.50.374–0.413 | — | — | track, BMX, single-speed and hub-gear bikes |
| Single speed 3/32 in | 2.380.094 | 7.1–7.30.280–0.287 | — | — | single-speed conversions using derailleur cogs |
| 5/6/7-speed | 2.380.094 | 7.1–7.30.280–0.287 | — | — | older derailleur bikes, kids' bikes |
| 8-speed | 2.380.094 | 7.1–7.30.280–0.287 | — | — | entry-level road and MTB |
| 9-speed | 2.200.087 | 6.5–70.256–0.276 | — | — | road and MTB (9s) |
| 10-speed | 2.200.087 | 5.88–60.231–0.236 | — | — | road and MTB (10s); early 10s chains up to 7.0 mm |
| 11-speed | 2.200.087 | 5.5–5.620.217–0.221 | — | — | road and MTB (11s) |
| 12-speed | 2.200.087 | 5.2–5.30.205–0.209 | — | — | road and MTB (12s); SRAM Flattop is about 5.0 mm |
| 13-speed | 2.200.087 | 4.90.193 | — | — | Campagnolo Ekar and 13s road, Rotor 13s |
| Freehub / cassette standards | |||||
| Shimano HG (8–10s, 11s MTB) | — | — | 8–11 | 11 | the most common freehub; road 11s needs the longer body below |
| Shimano HG 11s road | — | — | 8–12 | 11 | 1.85 mm longer than the 8–10s body; 8–10s cassettes fit with a 1.85 mm spacer; also takes Shimano 12s road |
| Shimano Micro Spline | — | — | 12 (also 11) | 10 | Shimano 12s MTB (and Deore 11s); splined, not compatible with HG cassettes |
| SRAM XD | — | — | 11–12 | 10 | SRAM Eagle and 1x MTB cassettes |
| SRAM XDR | — | — | 12 | 10 | SRAM road (AXS); 1.85 mm longer than XD; XD cassettes fit with a 1.85 mm spacer |
| Campagnolo FW | — | — | 9–12 | 11 | Campagnolo road cassettes 9–12s |
| Campagnolo N3W | — | — | 13 (and 12 with adapter) | 9 | Campagnolo Ekar 13s and later 13s road |
No exact match. The nearest sizes:
What has to match
A chain must match the number of rear cogs (it sets the outer width and the cog spacing), not the brand: an 11-speed KMC chain works on an 11-speed Shimano cassette. Chains for one more speed usually work acceptably one step down; one step up rubs and shifts badly. Single-speed and hub-gear bikes take 1/8 in chains; 3/32 in derailleur cogs need 3/32 in or narrower.
The freehub body decides which cassettes fit the wheel. HG splines take Shimano and SRAM road/MTB cassettes with 11 t or larger smallest cogs; to get 10 t (SRAM Eagle) or 9 t cogs you need XD, Micro Spline or N3W. Many hubs accept interchangeable freehub bodies, so a wheel can often be converted.
Joining: 9- to 13-speed chains use a quick link (master link) of the same speed or a special pin, and each new chain should be cut to length on the bike. Measure wear with a chain checker: replace at 0.5 % elongation (0.75 % for 8-speed and older).
About Bike Chains & Freehubs
The 1/2 in pitch and 7.75 mm roller have stayed the same since the safety bicycle; extra speeds came from thinner plates, flush pins and closer cog spacing. That is why 9- to 13-speed chains are not interchangeable even though they look alike, and why chainrings and cogs have speed-specific tooth shapes.
SRAM's 12-speed road and Eagle Transmission groups use a Flattop chain (about 5.0 mm wide) that is not compatible with standard 12-speed chains on SRAM AXS road cassettes. Shimano 12-speed chains need Shimano's quick link because of the plate shape.
Freehub body lengths also differ for road: Shimano's 11-speed road body is 1.85 mm longer than the 8–10-speed body, and SRAM XDR is 1.85 mm longer than XD. Older cassettes fit the longer bodies with a 1.85 mm spacer behind them.
Questions
What is the difference between 1/8 and 3/32 chains?
Inner width: 1/8 in (3.18 mm) for single-speed, BMX and hub-gear bikes; 3/32 in (2.38 mm) for derailleur cogs. A 1/8 chain is loose on 3/32 cogs; a 3/32 chain does not fit 1/8 in cogs.
How wide is an 11-speed chain?
About 5.5–5.6 mm outer width. 10-speed is about 5.9 mm, 12-speed about 5.2–5.3 mm.
Can I use a 12-speed chain on 11-speed?
Usually it works acceptably (narrower chain on wider spacing), but shifting is best with the matching chain. A wider chain on a cassette with more speeds rubs.
What is the difference between HG and XD?
Shimano HG is a splined body for cassettes with an 11 t smallest cog; SRAM XD has a threaded/splined interface that allows a 10 t cog. They are not interchangeable; many hubs offer both bodies.
What is Micro Spline?
Shimano's 12-speed MTB freehub with fine splines that allows a 10 t cog. Shimano 12-speed MTB cassettes with a 10 t cog need it.
Sources
- ISO 9633: Cycle chains, characteristics and test methods
- Shimano: Dealer manuals and compatibility charts (chains, HG, Micro Spline freehubs)
- SRAM: XD / XDR driver body and Eagle chain specifications
- Campagnolo: Ekar 13s and N3W freehub technical documents
- KMC: Chain specifications (outer width by speed)
- Sheldon Brown: Bicycle chains and cassette compatibility
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.