UPN 180 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)
UPN 180 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 180 mm (7.087 in) deep with a 70 mm (2.756 in) flange, a 8 mm (0.315 in) web and a 11 mm (0.433 in) flange. Mass 22 kg/m (14.783 lb/ft), area 28 cm² (4.340 in²); strong-axis I = 1,350 cm⁴ (32.43 in⁴), Wel = 150 cm³ (9.15 in³).
- hDepth
- 180 mm7.087 in7.087 in180 mm
- bFlange width
- 70 mm2.756 in2.756 in70 mm
- twWeb thickness
- 8 mm0.315 in0.315 in8 mm
- tfFlange thickness
- 11 mm0.433 in0.433 in11 mm
Drawing
UPN 180 specifications
| hDepth | 180 mm7.087 in |
|---|---|
| bFlange width | 70 mm2.756 in |
| twWeb thickness | 8 mm0.315 in |
| tfFlange thickness | 11 mm0.433 in |
| r1Root radius | 11 mm0.433 in |
| r2Toe radius | 5.5 mm0.217 in |
| GMass | 22 kg/m14.783 lb/ft |
| AArea | 28 cm²4.340 in² |
| IyMoment of inertia, strong axis | 1,350 cm⁴32.43 in⁴ |
| Wel,yElastic modulus, strong axis | 150 cm³9.15 in³ |
| Wpl,yPlastic modulus, strong axis | 179 cm³10.92 in³ |
| iyRadius of gyration, strong axis | 6.95 cm2.736 in |
| IzMoment of inertia, weak axis | 114 cm⁴2.74 in⁴ |
| Wel,zElastic modulus, weak axis | 22 cm³1.34 in³ |
| izRadius of gyration, weak axis | 2.02 cm0.795 in |
Also known as
U180UNP180
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.