UPN 240 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)
UPN 240 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 240 mm (9.449 in) deep with a 85 mm (3.346 in) flange, a 9.5 mm (0.374 in) web and a 13 mm (0.512 in) flange. Mass 33.2 kg/m (22.309 lb/ft), area 42.3 cm² (6.557 in²); strong-axis I = 3,600 cm⁴ (86.49 in⁴), Wel = 300 cm³ (18.31 in³).
- hDepth
- 240 mm9.449 in9.449 in240 mm
- bFlange width
- 85 mm3.346 in3.346 in85 mm
- twWeb thickness
- 9.5 mm0.374 in0.374 in9.5 mm
- tfFlange thickness
- 13 mm0.512 in0.512 in13 mm
Drawing
UPN 240 specifications
| hDepth | 240 mm9.449 in |
|---|---|
| bFlange width | 85 mm3.346 in |
| twWeb thickness | 9.5 mm0.374 in |
| tfFlange thickness | 13 mm0.512 in |
| r1Root radius | 13 mm0.512 in |
| r2Toe radius | 6.5 mm0.256 in |
| GMass | 33.2 kg/m22.309 lb/ft |
| AArea | 42.3 cm²6.557 in² |
| IyMoment of inertia, strong axis | 3,600 cm⁴86.49 in⁴ |
| Wel,yElastic modulus, strong axis | 300 cm³18.31 in³ |
| Wpl,yPlastic modulus, strong axis | 358 cm³21.85 in³ |
| iyRadius of gyration, strong axis | 9.22 cm3.630 in |
| IzMoment of inertia, weak axis | 248 cm⁴5.96 in⁴ |
| Wel,zElastic modulus, weak axis | 40 cm³2.44 in³ |
| izRadius of gyration, weak axis | 2.42 cm0.953 in |
Also known as
U240UNP240
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.