300×100×46 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

300×100×46 PFC (PFC: British parallel flange channels, BS 4-1) is 300 mm (11.811 in) deep with a 100 mm (3.937 in) flange, a 9 mm (0.354 in) web and a 16.5 mm (0.650 in) flange. Mass 45.5 kg/m (30.575 lb/ft), area 58 cm² (8.990 in²); strong-axis I = 8,230 cm⁴ (197.73 in⁴), Wel = 549 cm³ (33.5 in³).

hDepth
300 mm11.811 in11.811 in300 mm
bFlange width
100 mm3.937 in3.937 in100 mm
twWeb thickness
9 mm0.354 in0.354 in9 mm
tfFlange thickness
16.5 mm0.650 in0.650 in16.5 mm

Drawing

100 mm3.937 in300 mm11.811 intf 16.5 mmtf 0.650 intw 9 mmtw 0.354 inr1 15 mmr1 0.591 in
Drawn to scale · Dimensions in mmDimensions in inches

300×100×46 PFC specifications

hDepth300 mm11.811 in
bFlange width100 mm3.937 in
twWeb thickness9 mm0.354 in
tfFlange thickness16.5 mm0.650 in
r1Root radius15 mm0.591 in
GMass45.5 kg/m30.575 lb/ft
AArea58 cm²8.990 in²
IyMoment of inertia, strong axis8,230 cm⁴197.73 in⁴
Wel,yElastic modulus, strong axis549 cm³33.5 in³
Wpl,yPlastic modulus, strong axis641 cm³39.12 in³
iyRadius of gyration, strong axis11.9 cm4.685 in
IzMoment of inertia, weak axis568 cm⁴13.65 in⁴
Wel,zElastic modulus, weak axis81.7 cm³4.99 in³
izRadius of gyration, weak axis3.13 cm1.232 in

Also known as

PFC300x100x46

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.