300×90×41 PFC Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)
300×90×41 PFC (PFC: British parallel flange channels, BS 4-1) is 300 mm (11.811 in) deep with a 90 mm (3.543 in) flange, a 9 mm (0.354 in) web and a 15.5 mm (0.610 in) flange. Mass 41.4 kg/m (27.820 lb/ft), area 52.7 cm² (8.169 in²); strong-axis I = 7,220 cm⁴ (173.46 in⁴), Wel = 481 cm³ (29.35 in³).
- hDepth
- 300 mm11.811 in11.811 in300 mm
- bFlange width
- 90 mm3.543 in3.543 in90 mm
- twWeb thickness
- 9 mm0.354 in0.354 in9 mm
- tfFlange thickness
- 15.5 mm0.610 in0.610 in15.5 mm
Drawing
300×90×41 PFC specifications
| hDepth | 300 mm11.811 in |
|---|---|
| bFlange width | 90 mm3.543 in |
| twWeb thickness | 9 mm0.354 in |
| tfFlange thickness | 15.5 mm0.610 in |
| r1Root radius | 12 mm0.472 in |
| GMass | 41.4 kg/m27.820 lb/ft |
| AArea | 52.7 cm²8.169 in² |
| eCentroid from back of web | 2.6 cm1.024 in |
| IyMoment of inertia, strong axis | 7,220 cm⁴173.46 in⁴ |
| Wel,yElastic modulus, strong axis | 481 cm³29.35 in³ |
| Wpl,yPlastic modulus, strong axis | 568 cm³34.66 in³ |
| iyRadius of gyration, strong axis | 11.7 cm4.606 in |
| IzMoment of inertia, weak axis | 404 cm⁴9.71 in⁴ |
| Wel,zElastic modulus, weak axis | 63.1 cm³3.85 in³ |
| izRadius of gyration, weak axis | 2.77 cm1.091 in |
Also known as
PFC300x90x41
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.