UPE 300 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPE: European channels, parallel flanges
UPE 300 (UPE: European channels, parallel flanges) is 300 mm (11.811 in) deep with a 100 mm (3.937 in) flange, a 9.5 mm (0.374 in) web and a 15 mm (0.591 in) flange. Mass 44.4 kg/m (29.835 lb/ft), area 56.6 cm² (8.773 in²); strong-axis I = 7,820 cm⁴ (187.88 in⁴), Wel = 522 cm³ (31.85 in³).
- hDepth
- 300 mm11.811 in11.811 in300 mm
- bFlange width
- 100 mm3.937 in3.937 in100 mm
- twWeb thickness
- 9.5 mm0.374 in0.374 in9.5 mm
- tfFlange thickness
- 15 mm0.591 in0.591 in15 mm
Drawing
UPE 300 specifications
| hDepth | 300 mm11.811 in |
|---|---|
| bFlange width | 100 mm3.937 in |
| twWeb thickness | 9.5 mm0.374 in |
| tfFlange thickness | 15 mm0.591 in |
| r1Root radius | 15 mm0.591 in |
| GMass | 44.4 kg/m29.835 lb/ft |
| AArea | 56.6 cm²8.773 in² |
| eCentroid from back of web | 2.89 cm1.138 in |
| IyMoment of inertia, strong axis | 7,820 cm⁴187.88 in⁴ |
| Wel,yElastic modulus, strong axis | 522 cm³31.85 in³ |
| Wpl,yPlastic modulus, strong axis | 613 cm³37.41 in³ |
| iyRadius of gyration, strong axis | 11.8 cm4.646 in |
| IzMoment of inertia, weak axis | 538 cm⁴12.93 in⁴ |
| Wel,zElastic modulus, weak axis | 76 cm³4.64 in³ |
| izRadius of gyration, weak axis | 3.08 cm1.213 in |
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.