3/4" IMC Conduit Dimensions & Fill

Conduit Sizes · IMC: intermediate metal conduit

3/4" IMC conduit has a nominal inside diameter of 0.864 in (21.9 mm) and a total inside area of 0.586 in² (378 mm²). NEC Chapter 9 allows 0.234 in² (151 mm²) for three or more conductors (40 %), 0.182 in² (117 mm²) for two and 0.311 in² (201 mm²) for one.

IDInside diameter (nominal)
21.9 mm0.864 in0.864 in21.9 mm
ODOutside diameter
26.1 mm1.029 in1.029 in26.1 mm
A₄₀Fill area, over 2 wires (40 %)
151 mm²0.234 in²0.234 in²151 mm²

Drawing

40 % fill areaID ⌀21.9 mmID ⌀0.864 inOD ⌀26.1 mmOD ⌀1.029 in
Dashed circle: same area as the 40 % fill allowance.Drawn to scale · Dimensions in mmDimensions in inches

3/4" IMC specifications

Metric designator21
ODOutside diameter1.029 in26.1 mm
IDInside diameter (nominal)0.864 in21.9 mm
ATotal inside area (100 %)0.586 in²378 mm²
A₄₀Fill area, over 2 wires (40 %)0.234 in²151 mm²
A₃₁Fill area, 2 wires (31 %)0.182 in²117 mm²
A₅₃Fill area, 1 wire (53 %)0.311 in²201 mm²

Same trade size, other conduit types

All Conduit Sizes sizes

Compare all 80 conduit sizes in the Conduit Sizes chart →

Sources

  1. NFPA 70 (National Electrical Code), Chapter 9 Tables 1, 4 and 5
  2. NECA/IBEW: NEC Chapter 9 Table 4, Dimensions and percent area of conduit and tubing
  3. Wheatland Tube: EMT and conduit brochure (ANSI C80.1 / C80.3 / C80.6 dimensions)
  4. Steel Tube Institute: Intermediate metal conduit
  5. PDHonline E276: Conduit fill calculations (NEC Chapter 9 worked examples)
  6. IEC 61386-1 / EN 61386: Conduit systems for cable management; EN 60423: conduit outside diameters and threads

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.