M12 Countersunk Screw Dimensions

Countersunk Screws

Head dimensions of the M12 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M12 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.

dkHead dia. ISO 10642 (theor. max)
26.88 mm1.0583 in1.0583 in26.88 mm
kHead height ISO 10642 (max)
7.44 mm0.2929 in0.2929 in7.44 mm
sHex key ISO 10642 / DIN 7991
8 mm0.315 in0.315 in8 mm

Drawing

⌀26.88 mm⌀1.0583 in7.44 mm0.2929 inM1290°
s 8 mms 0.315 in
ISO 10642 hex socket head shownDrawn to scale · Dimensions in mmDimensions in inches

M12 specifications

dMajor diameter12 mm0.472 in
PPitch1.75 mm0.0689 in
dkHead dia. ISO 10642 (theor. max)26.88 mm1.0583 in
Head dia. ISO 10642 (actual min)23.12 mm0.9102 in
kHead height ISO 10642 (max)7.44 mm0.2929 in
sHex key ISO 10642 / DIN 79918 mm0.315 in
Head dia. DIN 799124 mm0.945 in
Head height DIN 79916.5 mm0.2559 in

Also known as

M12x1.75

Hex key for the M12

M12 in other charts

All Countersunk Screws sizes

Compare all 13 sizes in the Countersunk Screws chart →

Sources

  1. ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
  2. ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
  3. Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
  4. fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
  5. Böllhoff: DIN 965 stainless A4 cross recess, product data sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.