Metric Hex Nut Size Chart
Width across flats and height of metric hexagon nuts: ISO 4032 regular nuts, the older DIN 934 nuts still sold everywhere, and ISO 4035 thin (jam) nuts. An M8 nut is 13 mm across the flats and 6.8 mm high (ISO) or 6.5 mm high (DIN).
Size chartTap a size for its drawing and full specs
| Size | PThread pitchmmTPI | sWidth across flats (ISO 4032)mmin | mHeight, ISO 4032 (max.)mmin | Width across flats (DIN 934)mmin | Height, DIN 934mmin | Thin nut height, ISO 4035 (max.)mmin |
|---|---|---|---|---|---|---|
| M1.6 | 0.3572.6 | 3.20.126 | 1.30.051 | 3.20.126 | 1.30.051 | 10.039 |
| M2 | 0.463.5 | 40.157 | 1.60.063 | 40.157 | 1.60.063 | 1.20.047 |
| M2.5 | 0.4556.4 | 50.197 | 20.079 | 50.197 | 20.079 | 1.60.063 |
| M3 | 0.550.8 | 5.50.217 | 2.40.094 | 5.50.217 | 2.40.094 | 1.80.071 |
| M3.5 | 0.642.3 | 60.236 | 2.80.110 | 60.236 | 2.80.110 | 20.079 |
| M4 | 0.736.3 | 70.276 | 3.20.126 | 70.276 | 3.20.126 | 2.20.087 |
| M5 | 0.831.7 | 80.315 | 4.70.185 | 80.315 | 40.157 | 2.70.106 |
| M6 | 125.4 | 100.394 | 5.20.205 | 100.394 | 50.197 | 3.20.126 |
| M8 | 1.2520.3 | 130.512 | 6.80.268 | 130.512 | 6.50.256 | 40.157 |
| M10 | 1.516.9 | 160.630 | 8.40.331 | 170.669 | 80.315 | 50.197 |
| M12 | 1.7514.5 | 180.709 | 10.80.425 | 190.748 | 100.394 | 60.236 |
| M14 | 212.7 | 210.827 | 12.80.504 | 220.866 | 110.433 | 70.276 |
| M16 | 212.7 | 240.945 | 14.80.583 | 240.945 | 130.512 | 80.315 |
| M18 | 2.510.2 | 271.063 | 15.80.622 | 271.063 | 150.591 | 90.354 |
| M20 | 2.510.2 | 301.181 | 180.709 | 301.181 | 160.630 | 100.394 |
| M22 | 2.510.2 | 341.339 | 19.40.764 | 321.260 | 180.709 | 110.433 |
| M24 | 38.5 | 361.417 | 21.50.846 | 361.417 | 190.748 | 120.472 |
| M27 | 38.5 | 411.614 | 23.80.937 | 411.614 | 220.866 | 13.50.531 |
| M30 | 3.57.3 | 461.811 | 25.61.008 | 461.811 | 240.945 | 150.591 |
| M33 | 3.57.3 | 501.969 | 28.71.130 | 501.969 | 261.024 | 16.50.650 |
| M36 | 46.4 | 552.165 | 311.220 | 552.165 | 291.142 | 180.709 |
| M39 | 46.4 | 602.362 | 33.41.315 | 602.362 | 311.220 | 19.50.768 |
| M42 | 4.55.6 | 652.559 | 341.339 | 652.559 | 341.339 | 210.827 |
| M45 | 4.55.6 | 702.756 | 361.417 | 702.756 | 361.417 | 22.50.886 |
| M48 | 55.1 | 752.953 | 381.496 | 752.953 | 381.496 | 240.945 |
| M52 | 55.1 | 803.150 | 421.654 | 803.150 | 421.654 | 261.024 |
| M56 | 5.54.6 | 853.346 | 451.772 | 853.346 | 451.772 | 281.102 |
| M60 | 5.54.6 | 903.543 | 481.890 | 903.543 | 481.890 | 301.181 |
| M64 | 64.2 | 953.740 | 512.008 | 953.740 | 512.008 | 321.260 |
No exact match. The nearest sizes:
How to identify a metric nut
A nut is ordered by standard, thread and property class: ISO 4032 – M10 – 8. The class number on the nut (5, 8, 10, 12) matches the first number of the bolt class: use class 8 nuts on 8.8 bolts and class 10 nuts on 10.9 bolts. Stainless nuts are marked A2-70 or A4-80.
Measure across two parallel flats; that is the wrench size. If an M10 or M12 nut measures 17 or 19 mm, it is a DIN 934 nut; ISO 4032 nuts are 16 and 18 mm.
Height tells the type: a regular nut is about 0.8–0.9 × d high, a thin (jam) nut about 0.5 × d. Thin nuts carry far less load and are meant for locking a regular nut or for adjustment, not as the load-carrying nut.
About Hex Nuts
ISO 4032 (style 1) nuts replaced DIN 934. The ISO nuts are taller (about 0.9 d instead of 0.8 d), so that a nut of the matching class is stronger than the bolt and the bolt breaks before the nut thread strips. The four sizes whose width across flats changed are the same as for bolts: M10 17 → 16 mm, M12 19 → 18 mm, M14 22 → 21 mm, M22 32 → 34 mm.
Heights in the chart are the maximum nut heights from ISO 4032 and ISO 4035 and the nominal heights from DIN 934. From M42 upward ISO and DIN nuts have the same dimensions.
Nylon-insert lock nuts (DIN 985, now ISO 10511) are taller than plain nuts because of the insert: M3 4 mm, M4 5 mm, M5 5 mm, M6 6 mm, M8 8 mm, M10 10 mm, M12 12 mm. Their widths across flats follow the ISO or DIN series of the maker.
Thin nuts as lock nuts
When two nuts are jammed together, the thin nut goes on first (against the part) and the regular nut on top, tightened against it. The regular nut then carries the load. Putting the thin nut on top looks neater but leaves it carrying the bolt load it was not made for.
Questions
What size wrench for an M8 nut?
13 mm, for ISO 4032 and DIN 934 nuts alike. An M6 nut takes 10 mm, an M5 nut 8 mm, an M4 nut 7 mm.
What size is an M10 nut?
16 mm across the flats and 8.4 mm high (ISO 4032), or 17 mm across the flats and 8 mm high (DIN 934). An M10 thin nut (ISO 4035) is 5 mm high.
What is the difference between DIN 934 and ISO 4032?
ISO 4032 nuts are taller (about 0.9 d vs 0.8 d) and four sizes have different wrench sizes: M10 16/17 mm, M12 18/19 mm, M14 21/22 mm, M22 34/32 mm (ISO/DIN). Threads and property classes are interchangeable.
How tall is an M12 nut?
10.8 mm for an ISO 4032 nut, 10 mm for a DIN 934 nut and 6 mm for an ISO 4035 thin nut. A DIN 985 nylon lock nut is 12 mm.
Which nut class goes with an 8.8 bolt?
Class 8 (or higher). Match the nut class to the first number of the bolt class: 8.8 → 8, 10.9 → 10, 12.9 → 12.
Sources
- ISO 4032:2023, Fasteners, hexagon regular nuts (style 1)
- ISO 4035:2023, Fasteners, hexagon thin nuts (style 0)
- DIN 934 (withdrawn): Hexagon nuts, as reproduced in Böllhoff and Würth data sheets
- fasten.it: DIN EN ISO 4032 and DIN EN ISO 4035 dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.