-12 Hydraulic Hose: 3/4" ID

Hydraulic Hose Sizes

-12 hose has a 3/4" inside diameter (0.750 in / 19.0 mm), DN19 in metric catalogues. Maximum working pressure: 1250 psi (86 bar) for 100R1AT one-braid hose and 2250 psi (155 bar) for 100R2AT two-braid hose.

IDInside diameter
19.0 mm0.750 in0.750 in19.0 mm
DN (metric)
DN19
SAE 100R1AT (1 wire braid)
86 bar1250 psi1250 psi86 bar
SAE 100R2AT (2 wire braids)
155 bar2250 psi2250 psi155 bar

Drawing

ID 19.0 mmID 0.750 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-12 specifications

IDInside diameter0.750 in19.0 mm
Nominal ID3/4"
DN (metric)DN19
SAE 100R1AT (1 wire braid)86 bar1250 psi
SAE 100R2AT (2 wire braids)155 bar2250 psi
SAE 100R12 (4 spiral)276 bar4000 psi
SAE 100R13 (spiral)345 bar5000 psi
EN 853 1SN105 bar1523 psi
EN 853 2SN215 bar3118 psi

Also known as

DN19

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.