-16 Hydraulic Hose: 1" ID

Hydraulic Hose Sizes

-16 hose has a 1" inside diameter (1.000 in / 25.4 mm), DN25 in metric catalogues. Maximum working pressure: 1000 psi (69 bar) for 100R1AT one-braid hose and 2000 psi (138 bar) for 100R2AT two-braid hose.

IDInside diameter
25.4 mm1.000 in1.000 in25.4 mm
DN (metric)
DN25
SAE 100R1AT (1 wire braid)
69 bar1000 psi1000 psi69 bar
SAE 100R2AT (2 wire braids)
138 bar2000 psi2000 psi138 bar

Drawing

ID 25.4 mmID 1.000 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-16 specifications

IDInside diameter1.000 in25.4 mm
Nominal ID1"
DN (metric)DN25
SAE 100R1AT (1 wire braid)69 bar1000 psi
SAE 100R2AT (2 wire braids)138 bar2000 psi
SAE 100R12 (4 spiral)276 bar4000 psi
SAE 100R13 (spiral)345 bar5000 psi
EN 853 1SN88 bar1276 psi
EN 853 2SN165 bar2393 psi

-16 (1 in) R2 hose drops to 2,000 psi; for high-pressure 1 in lines use R12 (4,000 psi) or R13 (5,000 psi) spiral hose.

Also known as

DN25

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.