-20 Hydraulic Hose: 1-1/4" ID

Hydraulic Hose Sizes

-20 hose has a 1-1/4" inside diameter (1.250 in / 31.8 mm), DN31 in metric catalogues. Maximum working pressure: 625 psi (43 bar) for 100R1AT one-braid hose and 1625 psi (112 bar) for 100R2AT two-braid hose.

IDInside diameter
31.8 mm1.250 in1.250 in31.8 mm
DN (metric)
DN31
SAE 100R1AT (1 wire braid)
43 bar625 psi625 psi43 bar
SAE 100R2AT (2 wire braids)
112 bar1625 psi1625 psi112 bar

Drawing

ID 31.8 mmID 1.250 inCover2nd wire braid1st wire braidInner tube
Two-braid hose (R2 / 2SN) in section; one-braid R1 / 1SN hose has only the inner braid. The dash size is the inside diameter in sixteenths of an inch; wall build-up is schematic.Proportions shown, not to scale · Dimensions in mmDimensions in inches

-20 specifications

IDInside diameter1.250 in31.8 mm
Nominal ID1-1/4"
DN (metric)DN31
SAE 100R1AT (1 wire braid)43 bar625 psi
SAE 100R2AT (2 wire braids)112 bar1625 psi
SAE 100R13 (spiral)345 bar5000 psi
EN 853 1SN63 bar914 psi
EN 853 2SN125 bar1813 psi

Also known as

DN31

Matching fitting threads of the same dash size

All Hydraulic Hose Sizes sizes

Compare all 11 sizes in the Hydraulic Hose Sizes chart →

Sources

  1. SAE J517: Hydraulic Hose (100R1, 100R2, 100R12, 100R13)
  2. EN 853: Rubber hoses and hose assemblies, wire braid reinforced hydraulic type (1SN, 2SN)
  3. Parker Hannifin: Catalog 4400 Hose, Fittings and Equipment (hose specifications)
  4. Gates: Hydraulics Master Catalog (hose working pressure tables)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.