M14 Lock Washer Dimensions
Lock Washers
For an M14 bolt, the DIN 127 B split spring washer is 14.2 mm (0.559 in) inside (min), up to 24.1 mm (0.949 in) outside and 3 mm (0.118 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 24.1 mm0.949 in0.949 in24.1 mm
- sSplit DIN 127 B: thickness
- 3 mm0.118 in0.118 in3 mm
Drawing
M14 specifications
| d1Split DIN 127 B: inside (min) | 14.2 mm0.559 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 24.1 mm0.949 in |
| sSplit DIN 127 B: thickness | 3 mm0.118 in |
M14 tooth and conical washers are not listed; the size is uncommon.
M14 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.