M12 Lock Washer Dimensions
Lock Washers
For an M12 bolt, the DIN 127 B split spring washer is 12.2 mm (0.480 in) inside (min), up to 21.1 mm (0.831 in) outside and 2.5 mm (0.098 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 21.1 mm0.831 in0.831 in21.1 mm
- sSplit DIN 127 B: thickness
- 2.5 mm0.098 in0.098 in2.5 mm
- Tooth DIN 6798: outside
- 20.5 mm0.807 in0.807 in20.5 mm
- Conical DIN 6796: outside
- 29 mm1.142 in1.142 in29 mm
Drawing
M12 specifications
| d1Split DIN 127 B: inside (min) | 12.2 mm0.480 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 21.1 mm0.831 in |
| sSplit DIN 127 B: thickness | 2.5 mm0.098 in |
| Tooth DIN 6798: inside | 13 mm0.512 in |
| Tooth DIN 6798: outside | 20.5 mm0.807 in |
| Tooth DIN 6798: thickness | 1 mm0.039 in |
| Conical DIN 6796: inside | 13 mm0.512 in |
| Conical DIN 6796: outside | 29 mm1.142 in |
| Conical DIN 6796: thickness | 3 mm0.118 in |
| Conical DIN 6796: height (max) | 3.95 mm0.1555 in |
M12 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.