M16 Lock Washer Dimensions
Lock Washers
For an M16 bolt, the DIN 127 B split spring washer is 16.2 mm (0.638 in) inside (min), up to 27.4 mm (1.079 in) outside and 3.5 mm (0.138 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 27.4 mm1.079 in1.079 in27.4 mm
- sSplit DIN 127 B: thickness
- 3.5 mm0.138 in0.138 in3.5 mm
- Tooth DIN 6798: outside
- 26 mm1.024 in1.024 in26 mm
- Conical DIN 6796: outside
- 39 mm1.535 in1.535 in39 mm
Drawing
M16 specifications
| d1Split DIN 127 B: inside (min) | 16.2 mm0.638 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 27.4 mm1.079 in |
| sSplit DIN 127 B: thickness | 3.5 mm0.138 in |
| Tooth DIN 6798: inside | 17 mm0.669 in |
| Tooth DIN 6798: outside | 26 mm1.024 in |
| Tooth DIN 6798: thickness | 1.2 mm0.047 in |
| Conical DIN 6796: inside | 17 mm0.669 in |
| Conical DIN 6796: outside | 39 mm1.535 in |
| Conical DIN 6796: thickness | 4 mm0.157 in |
| Conical DIN 6796: height (max) | 5.25 mm0.2067 in |
M16 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.