M3 Lock Washer Dimensions

Lock Washers

For an M3 bolt, the DIN 127 B split spring washer is 3.1 mm (0.122 in) inside (min), up to 6.2 mm (0.244 in) outside and 0.8 mm (0.031 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.

d2Split DIN 127 B: outside (max)
6.2 mm0.244 in0.244 in6.2 mm
sSplit DIN 127 B: thickness
0.8 mm0.031 in0.031 in0.8 mm
Tooth DIN 6798: outside
6 mm0.236 in0.236 in6 mm
Conical DIN 6796: outside
7 mm0.276 in0.276 in7 mm

Drawing

⌀6.2 mm⌀0.244 in⌀3.1 mm⌀0.122 in
DIN 127 B split washer sections 0.8 mms 0.031 inDIN 6796 conical washer sectionh 0.85 mmh 0.0335 ins 0.6 mms 0.024 in
Top view: DIN 127 B split washerDrawn to scale · Dimensions in mmDimensions in inches

M3 specifications

d1Split DIN 127 B: inside (min)3.1 mm0.122 in
d2Split DIN 127 B: outside (max)6.2 mm0.244 in
sSplit DIN 127 B: thickness0.8 mm0.031 in
Tooth DIN 6798: inside3.2 mm0.126 in
Tooth DIN 6798: outside6 mm0.236 in
Tooth DIN 6798: thickness0.4 mm0.016 in
Conical DIN 6796: inside3.2 mm0.126 in
Conical DIN 6796: outside7 mm0.276 in
Conical DIN 6796: thickness0.6 mm0.024 in
Conical DIN 6796: height (max)0.85 mm0.0335 in

M3 in other charts

All Lock Washers sizes

Compare all 11 sizes in the Lock Washers chart →

Sources

  1. DIN 127: Spring lock washers with square or tang ends (withdrawn)
  2. DIN 6798: Serrated lock washers (withdrawn)
  3. DIN 6796:2009, Conical spring washers for bolted connections
  4. Westfield Fasteners: DIN 127 B spring washer table
  5. Westfield Fasteners: DIN 6796 conical spring washers
  6. Böllhoff: DIN 6798 A stainless A2 data sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.