M4 Lock Washer Dimensions
Lock Washers
For an M4 bolt, the DIN 127 B split spring washer is 4.1 mm (0.161 in) inside (min), up to 7.6 mm (0.299 in) outside and 0.9 mm (0.035 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 7.6 mm0.299 in0.299 in7.6 mm
- sSplit DIN 127 B: thickness
- 0.9 mm0.035 in0.035 in0.9 mm
- Tooth DIN 6798: outside
- 8 mm0.315 in0.315 in8 mm
- Conical DIN 6796: outside
- 9 mm0.354 in0.354 in9 mm
Drawing
M4 specifications
| d1Split DIN 127 B: inside (min) | 4.1 mm0.161 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 7.6 mm0.299 in |
| sSplit DIN 127 B: thickness | 0.9 mm0.035 in |
| Tooth DIN 6798: inside | 4.3 mm0.169 in |
| Tooth DIN 6798: outside | 8 mm0.315 in |
| Tooth DIN 6798: thickness | 0.5 mm0.020 in |
| Conical DIN 6796: inside | 4.3 mm0.169 in |
| Conical DIN 6796: outside | 9 mm0.354 in |
| Conical DIN 6796: thickness | 1 mm0.039 in |
| Conical DIN 6796: height (max) | 1.3 mm0.0512 in |
M4 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.