M5 Lock Washer Dimensions
Lock Washers
For an M5 bolt, the DIN 127 B split spring washer is 5.1 mm (0.201 in) inside (min), up to 9.2 mm (0.362 in) outside and 1.2 mm (0.047 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 9.2 mm0.362 in0.362 in9.2 mm
- sSplit DIN 127 B: thickness
- 1.2 mm0.047 in0.047 in1.2 mm
- Tooth DIN 6798: outside
- 10 mm0.394 in0.394 in10 mm
- Conical DIN 6796: outside
- 11 mm0.433 in0.433 in11 mm
Drawing
M5 specifications
| d1Split DIN 127 B: inside (min) | 5.1 mm0.201 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 9.2 mm0.362 in |
| sSplit DIN 127 B: thickness | 1.2 mm0.047 in |
| Tooth DIN 6798: inside | 5.3 mm0.209 in |
| Tooth DIN 6798: outside | 10 mm0.394 in |
| Tooth DIN 6798: thickness | 0.6 mm0.024 in |
| Conical DIN 6796: inside | 5.3 mm0.209 in |
| Conical DIN 6796: outside | 11 mm0.433 in |
| Conical DIN 6796: thickness | 1.2 mm0.047 in |
| Conical DIN 6796: height (max) | 1.55 mm0.0610 in |
M5 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.