M6 Lock Washer Dimensions
Lock Washers
For an M6 bolt, the DIN 127 B split spring washer is 6.1 mm (0.240 in) inside (min), up to 11.8 mm (0.465 in) outside and 1.6 mm (0.063 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 11.8 mm0.465 in0.465 in11.8 mm
- sSplit DIN 127 B: thickness
- 1.6 mm0.063 in0.063 in1.6 mm
- Tooth DIN 6798: outside
- 11 mm0.433 in0.433 in11 mm
- Conical DIN 6796: outside
- 14 mm0.551 in0.551 in14 mm
Drawing
M6 specifications
| d1Split DIN 127 B: inside (min) | 6.1 mm0.240 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 11.8 mm0.465 in |
| sSplit DIN 127 B: thickness | 1.6 mm0.063 in |
| Tooth DIN 6798: inside | 6.4 mm0.252 in |
| Tooth DIN 6798: outside | 11 mm0.433 in |
| Tooth DIN 6798: thickness | 0.7 mm0.028 in |
| Conical DIN 6796: inside | 6.4 mm0.252 in |
| Conical DIN 6796: outside | 14 mm0.551 in |
| Conical DIN 6796: thickness | 1.5 mm0.059 in |
| Conical DIN 6796: height (max) | 2 mm0.0787 in |
M6 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.