M8 Lock Washer Dimensions
Lock Washers
For an M8 bolt, the DIN 127 B split spring washer is 8.1 mm (0.319 in) inside (min), up to 14.8 mm (0.583 in) outside and 2 mm (0.079 in) thick. The DIN 6798 tooth washer and the DIN 6796 conical spring washer for the same bolt are in the table below where the standard lists them.
- d2Split DIN 127 B: outside (max)
- 14.8 mm0.583 in0.583 in14.8 mm
- sSplit DIN 127 B: thickness
- 2 mm0.079 in0.079 in2 mm
- Tooth DIN 6798: outside
- 15 mm0.591 in0.591 in15 mm
- Conical DIN 6796: outside
- 18 mm0.709 in0.709 in18 mm
Drawing
M8 specifications
| d1Split DIN 127 B: inside (min) | 8.1 mm0.319 in |
|---|---|
| d2Split DIN 127 B: outside (max) | 14.8 mm0.583 in |
| sSplit DIN 127 B: thickness | 2 mm0.079 in |
| Tooth DIN 6798: inside | 8.4 mm0.331 in |
| Tooth DIN 6798: outside | 15 mm0.591 in |
| Tooth DIN 6798: thickness | 0.8 mm0.031 in |
| Conical DIN 6796: inside | 8.4 mm0.331 in |
| Conical DIN 6796: outside | 18 mm0.709 in |
| Conical DIN 6796: thickness | 2 mm0.079 in |
| Conical DIN 6796: height (max) | 2.6 mm0.1024 in |
M8 in other charts
All Lock Washers sizes
Sources
- DIN 127: Spring lock washers with square or tang ends (withdrawn)
- DIN 6798: Serrated lock washers (withdrawn)
- DIN 6796:2009, Conical spring washers for bolted connections
- Westfield Fasteners: DIN 127 B spring washer table
- Westfield Fasteners: DIN 6796 conical spring washers
- Böllhoff: DIN 6798 A stainless A2 data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.