225M Motor Frame Dimensions
Motor Frame Sizes · IEC 60072-1 (mm)
The 225M frame (IEC 60072-1, mm) has a shaft height of 225 mm (8.858 in) and a 60 mm (2.362 in) shaft 140 mm (5.512 in) long. Foot holes: 356 mm (14.016 in) across × 311 mm (12.244 in) along, the first one 149 mm (5.866 in) from the shaft shoulder; hole diameter 18.5 mm (0.728 in).
- HShaft height (IEC H / NEMA D)
- 225 mm8.858 in8.858 in225 mm
- DShaft diameter (IEC D / NEMA U)
- 60 mm2.362 in2.362 in60 mm
- AFoot holes across (IEC A / NEMA 2E)
- 356 mm14.016 in14.016 in356 mm
- BFoot holes along (IEC B / NEMA 2F)
- 311 mm12.244 in12.244 in311 mm
Drawing
225M specifications
| HShaft height (IEC H / NEMA D) | 225 mm8.858 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 356 mm14.016 in |
| BFoot holes along (IEC B / NEMA 2F) | 311 mm12.244 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 149 mm5.866 in |
| KFoot bolt hole (IEC K / NEMA H) | 18.5 mm0.728 in |
| DShaft diameter (IEC D / NEMA U) | 60 mm2.362 in |
| EShaft extension (IEC E / NEMA N-W) | 140 mm5.512 in |
| Shaft diameter, 2-pole (IEC) | 55 mm2.165 in |
| Shaft extension, 2-pole (IEC) | 110 mm4.331 in |
From frame 225 upward 2-pole motors have a smaller shaft (55 × 110 mm here) than 4-pole and slower motors (60 × 140 mm).
Same shaft height, other foot length
Similar shaft height in the other system
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.