250M Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 250M frame (IEC 60072-1, mm) has a shaft height of 250 mm (9.843 in) and a 65 mm (2.559 in) shaft 140 mm (5.512 in) long. Foot holes: 406 mm (15.984 in) across × 349 mm (13.740 in) along, the first one 168 mm (6.614 in) from the shaft shoulder; hole diameter 24 mm (0.945 in).

HShaft height (IEC H / NEMA D)
250 mm9.843 in9.843 in250 mm
DShaft diameter (IEC D / NEMA U)
65 mm2.559 in2.559 in65 mm
AFoot holes across (IEC A / NEMA 2E)
406 mm15.984 in15.984 in406 mm
BFoot holes along (IEC B / NEMA 2F)
349 mm13.740 in13.740 in349 mm

Drawing

Drive-end viewA = 406 mmA = 15.984 inH = 250 mmH = 9.843 in
Side viewB = 349 mmB = 13.740 inC = 168 mmC = 6.614 inE = 140 mmE = 5.512 in⌀D = 65 mm⌀D = 2.559 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

250M specifications

HShaft height (IEC H / NEMA D)250 mm9.843 in
AFoot holes across (IEC A / NEMA 2E)406 mm15.984 in
BFoot holes along (IEC B / NEMA 2F)349 mm13.740 in
CShaft shoulder to first hole (IEC C / NEMA BA)168 mm6.614 in
KFoot bolt hole (IEC K / NEMA H)24 mm0.945 in
DShaft diameter (IEC D / NEMA U)65 mm2.559 in
EShaft extension (IEC E / NEMA N-W)140 mm5.512 in
Shaft diameter, 2-pole (IEC)60 mm2.362 in
Shaft extension, 2-pole (IEC)140 mm5.512 in

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.