M2.5 Set Screw Dimensions

Set Screws

An M2.5 socket set screw takes a 1.3 mm (0.051 in) hex key in every point style. The flat and dog points are up to 1.5 mm (0.059 in) in diameter, the cup point 1.2 mm (0.047 in), and the cone point ends in a 0.65 mm (0.0256 in) flat. The long dog point is at least 1.25 mm (0.0492 in) long.

sHex key size
1.3 mm0.051 in0.051 in1.3 mm
dpFlat / dog point dia. (max)
1.5 mm0.059 in0.059 in1.5 mm
dzCup point dia. (max)
1.2 mm0.047 in0.047 in1.2 mm
dtCone point tip dia. (max)
0.65 mm0.0256 in0.0256 in0.65 mm

Drawing

FlatISO 40261.5 mm0.059 inConeISO 40270.65 mm0.0256 inDogISO 40281.5 mm0.059 in1.25 mm0.0492 inCupISO 40291.2 mm0.047 in
s 1.3 mms 0.051 inM2.5
Drawn to scale · Dimensions in mmDimensions in inches

M2.5 specifications

dMajor diameter2.5 mm0.098 in
PPitch0.45 mm0.0177 in
sHex key size1.3 mm0.051 in
dpFlat / dog point dia. (max)1.5 mm0.059 in
dtCone point tip dia. (max)0.65 mm0.0256 in
dzCup point dia. (max)1.2 mm0.047 in
z1Dog length, short (min)0.63 mm0.0248 in
z2Dog length, long (min)1.25 mm0.0492 in

Also known as

M2.5x0.45

Hex key for the M2.5

M2.5 in other charts

All Set Screws sizes

Compare all 13 sizes in the Set Screws chart →

Sources

  1. ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
  2. Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
  3. Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
  4. Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
  5. Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.