M3 Set Screw Dimensions

Set Screws

An M3 socket set screw takes a 1.5 mm (0.059 in) hex key in every point style. The flat and dog points are up to 2 mm (0.079 in) in diameter, the cup point 1.4 mm (0.055 in), and the cone point ends in a 0.75 mm (0.0295 in) flat. The long dog point is at least 1.5 mm (0.0591 in) long.

sHex key size
1.5 mm0.059 in0.059 in1.5 mm
dpFlat / dog point dia. (max)
2 mm0.079 in0.079 in2 mm
dzCup point dia. (max)
1.4 mm0.055 in0.055 in1.4 mm
dtCone point tip dia. (max)
0.75 mm0.0295 in0.0295 in0.75 mm

Drawing

FlatISO 40262 mm0.079 inConeISO 40270.75 mm0.0295 inDogISO 40282 mm0.079 in1.5 mm0.0591 inCupISO 40291.4 mm0.055 in
s 1.5 mms 0.059 inM3
Drawn to scale · Dimensions in mmDimensions in inches

M3 specifications

dMajor diameter3 mm0.118 in
PPitch0.5 mm0.0197 in
sHex key size1.5 mm0.059 in
dpFlat / dog point dia. (max)2 mm0.079 in
dtCone point tip dia. (max)0.75 mm0.0295 in
dzCup point dia. (max)1.4 mm0.055 in
z1Dog length, short (min)0.75 mm0.0295 in
z2Dog length, long (min)1.5 mm0.0591 in

M3 set screws with a 1.5 mm key are standard on stepper-motor pulleys and couplings (5 mm and 8 mm shafts). Use a good key: worn 1.5 mm keys round out the socket.

Also known as

M3x0.5

Hex key for the M3

M3 in other charts

All Set Screws sizes

Compare all 13 sizes in the Set Screws chart →

Sources

  1. ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
  2. Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
  3. Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
  4. Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
  5. Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.