SWG Wire Gauge Chart (British Standard Wire Gauge)
The Imperial Standard Wire Gauge, from 7/0 (0.500 in) down to 50 SWG (0.001 in). SWG numbers are not AWG numbers: 14 SWG is 2.03 mm, while 14 AWG is 1.63 mm. The same number is roughly two AWG sizes thicker in SWG.
Size chartDiameters as defined by BS 3737; mm converted exactly
| Gauge | dDiametermmin | ACross-sectionmm² | Nearest AWG (diameter) |
|---|---|---|---|
| 7/0 SWG | 12.7000.5000 | 127 | 4/0 AWG (11.68 mm) |
| 6/0 SWG | 11.7860.4640 | 109 | 4/0 AWG (11.68 mm) |
| 5/0 SWG | 10.9730.4320 | 94.6 | 3/0 AWG (10.40 mm) |
| 4/0 SWG | 10.1600.4000 | 81.1 | 3/0 AWG (10.40 mm) |
| 3/0 SWG | 9.4490.3720 | 70.1 | 2/0 AWG (9.27 mm) |
| 2/0 SWG | 8.8390.3480 | 61.4 | 2/0 AWG (9.27 mm) |
| 0 SWG | 8.2300.3240 | 53.2 | 1/0 AWG (8.25 mm) |
| 1 SWG | 7.6200.3000 | 45.6 | 1 AWG (7.35 mm) |
| 2 SWG | 7.0100.2760 | 38.6 | 1 AWG (7.35 mm) |
| 3 SWG | 6.4010.2520 | 32.2 | 2 AWG (6.54 mm) |
| 4 SWG | 5.8930.2320 | 27.3 | 3 AWG (5.83 mm) |
| 5 SWG | 5.3850.2120 | 22.8 | 4 AWG (5.19 mm) |
| 6 SWG | 4.8770.1920 | 18.7 | 5 AWG (4.62 mm) |
| 7 SWG | 4.4700.1760 | 15.7 | 5 AWG (4.62 mm) |
| 8 SWG | 4.0640.1600 | 13 | 6 AWG (4.12 mm) |
| 9 SWG | 3.6580.1440 | 10.5 | 7 AWG (3.66 mm) |
| 10 SWG | 3.2510.1280 | 8.3 | 8 AWG (3.26 mm) |
| 11 SWG | 2.9460.1160 | 6.82 | 9 AWG (2.91 mm) |
| 12 SWG | 2.6420.1040 | 5.48 | 10 AWG (2.59 mm) |
| 13 SWG | 2.3370.0920 | 4.29 | 11 AWG (2.30 mm) |
| 14 SWG | 2.0320.0800 | 3.24 | 12 AWG (2.05 mm) |
| 15 SWG | 1.8290.0720 | 2.63 | 13 AWG (1.83 mm) |
| 16 SWG | 1.6260.0640 | 2.08 | 14 AWG (1.63 mm) |
| 17 SWG | 1.4220.0560 | 1.59 | 15 AWG (1.45 mm) |
| 18 SWG | 1.2190.0480 | 1.17 | 16 AWG (1.29 mm) |
| 19 SWG | 1.0160.0400 | 0.811 | 18 AWG (1.02 mm) |
| 20 SWG | 0.9140.0360 | 0.657 | 19 AWG (0.912 mm) |
| 21 SWG | 0.8130.0320 | 0.519 | 20 AWG (0.812 mm) |
| 22 SWG | 0.7110.0280 | 0.397 | 21 AWG (0.723 mm) |
| 23 SWG | 0.6100.0240 | 0.292 | 22 AWG (0.644 mm) |
| 24 SWG | 0.5590.0220 | 0.245 | 23 AWG (0.573 mm) |
| 25 SWG | 0.5080.0200 | 0.203 | 24 AWG (0.511 mm) |
| 26 SWG | 0.4570.0180 | 0.164 | 25 AWG (0.455 mm) |
| 27 SWG | 0.4170.0164 | 0.136 | 26 AWG (0.405 mm) |
| 28 SWG | 0.3760.0148 | 0.111 | 27 AWG (0.361 mm) |
| 29 SWG | 0.3450.0136 | 0.0937 | 27 AWG (0.361 mm) |
| 30 SWG | 0.3150.0124 | 0.0779 | 28 AWG (0.321 mm) |
| 31 SWG | 0.2950.0116 | 0.0682 | 29 AWG (0.286 mm) |
| 32 SWG | 0.2740.0108 | 0.0591 | 29 AWG (0.286 mm) |
| 33 SWG | 0.2540.0100 | 0.0507 | 30 AWG (0.255 mm) |
| 34 SWG | 0.2340.0092 | 0.0429 | 31 AWG (0.227 mm) |
| 35 SWG | 0.2130.0084 | 0.0358 | 32 AWG (0.202 mm) |
| 36 SWG | 0.1930.0076 | 0.0293 | 32 AWG (0.202 mm) |
| 37 SWG | 0.1730.0068 | 0.0234 | 33 AWG (0.180 mm) |
| 38 SWG | 0.1520.0060 | 0.0182 | 34 AWG (0.160 mm) |
| 39 SWG | 0.1320.0052 | 0.0137 | 36 AWG (0.127 mm) |
| 40 SWG | 0.1220.0048 | 0.0117 | 36 AWG (0.127 mm) |
| 41 SWG | 0.1120.0044 | 0.0098 | 37 AWG (0.113 mm) |
| 42 SWG | 0.1020.0040 | 0.0081 | 38 AWG (0.101 mm) |
| 43 SWG | 0.0910.0036 | 0.0066 | 39 AWG (0.090 mm) |
| 44 SWG | 0.0810.0032 | 0.0052 | 40 AWG (0.080 mm) |
| 45 SWG | 0.0710.0028 | 0.004 | 41 AWG (0.071 mm) |
| 46 SWG | 0.0610.0024 | 0.0029 | 42 AWG (0.063 mm) |
| 47 SWG | 0.0510.0020 | 0.002 | 44 AWG (0.050 mm) |
| 48 SWG | 0.0410.0016 | 0.0013 | 46 AWG (0.040 mm) |
| 49 SWG | 0.0300.0012 | 0.0007 | 48 AWG (0.032 mm) |
| 50 SWG | 0.0250.0010 | 0.0005 | 50 AWG (0.025 mm) |
No exact match. The nearest sizes:
How the SWG numbers work
SWG was fixed by the British Board of Trade in 1883 and later published as BS 3737. Each gauge number is simply a defined diameter in inches: 7/0 is 0.500 in, 0 is 0.324 in, 10 is 0.128 in, 20 is 0.036 in, 30 is 0.0124 in and 50 is 0.001 in (one thou). Larger numbers are thinner wire; sizes above 0 are written 2/0 … 7/0 (or 00 … 0000000).
Unlike AWG, SWG is not a single geometric series. It runs in constant steps within ranges: 0.012 in per gauge from 10 to 14 SWG, 0.008 in from 14 to 19, 0.004 in from 19 to 23, and only 0.0004 in from 40 to 49. There is no formula, so use the table.
To identify a wire, measure the bare conductor with a micrometer or caliper and find the nearest diameter. A 2.0 mm wire is 14 SWG (2.032 mm); 1.2 mm is 18 SWG (1.219 mm); 0.5 mm is close to 25 SWG (0.508 mm). For stranded wire, measure one strand.
About SWG Wire Gauge
The table lists all 57 SWG sizes with the legal diameter in inches, the exact metric conversion (1 in = 25.4 mm) and the cross-sectional area of a round wire of that diameter. The last column gives the AWG size whose diameter is closest, with its diameter in mm. Use it when a British drawing or an old catalogue calls for SWG and only AWG or metric wire is at hand.
BS 3737 was withdrawn and replaced by metric sizes (BS 6722), so new British cable is specified in mm² and wire in mm. SWG survives in a few places: enamelled copper winding wire, piano and spring wire, fuse wire, jewellery and craft wire, steel tube wall thickness ("16 gauge tube" = 0.064 in = 1.63 mm), guitar and model-engineering suppliers, and older UK and Commonwealth drawings.
Do not mix up SWG with AWG (the North American gauge), the old Birmingham Wire Gauge (BWG, still used for hypodermic needles and some tube) or sheet-metal gauges. They all use numbers from 0 to about 40, and they all differ: for gauge 18, SWG is 1.219 mm, AWG 1.024 mm, BWG 1.245 mm and US Manufacturers' Standard steel sheet 1.214 mm.
Common SWG sizes and what they are used for
Typical uses; the trade still asks for these by gauge number.
| SWG | Diameter | Typical use |
|---|---|---|
| 10 | 3.25 mm (0.128 in) | Fencing and tie wire, heavy springs |
| 14 | 2.03 mm (0.080 in) | Galvanised garden and tie wire, chain-link fence wire |
| 16 | 1.63 mm (0.064 in) | Steel tube wall ("16 gauge"), bending wire, earthing straps |
| 18 | 1.22 mm (0.048 in) | Craft and jewellery wire, model engineering, tube walls |
| 20 | 0.91 mm (0.036 in) | Jewellery wire, binding wire |
| 22–26 | 0.71–0.46 mm | Enamelled winding wire, tinned copper wire, wire-wrap substitutes |
| 30–40 | 0.32–0.12 mm | Fine winding wire for transformers, relays, pickups |
SWG, AWG and mm² side by side
The same gauge number is thicker in SWG than in AWG for most of the range, by about two AWG steps around 10–20 and by four steps near 40 (40 SWG = 0.122 mm ≈ 36 AWG). For copper conductors sold in mm², convert via the area column: 1.5 mm² is between 17 and 18 SWG (1.38 mm diameter), 2.5 mm² is near 16 SWG (1.78 mm). The AWG chart and the metric wire chart give resistance and ampacity.
Questions
What is 14 SWG in mm?
14 SWG is 0.080 in = 2.032 mm in diameter, with a cross-section of 3.24 mm². The nearest AWG is 12 AWG (2.05 mm).
Is SWG the same as AWG?
No. SWG (British Imperial Standard Wire Gauge) and AWG (American Wire Gauge) use different diameters for the same number. 18 SWG is 1.219 mm, 18 AWG is 1.024 mm. The SWG wire is about two AWG sizes thicker (close to 16 AWG, 1.29 mm).
What is 18 SWG in mm and inches?
18 SWG is 0.048 in, or 1.219 mm, with a cross-section of 1.17 mm².
How thick is 16 gauge (SWG) steel tube?
In British tube catalogues "16 gauge" means 16 SWG wall thickness: 0.064 in = 1.626 mm. 18 gauge is 1.219 mm, 14 gauge 2.032 mm and 10 gauge 3.251 mm.
Is there a formula for SWG?
No. SWG diameters were defined as a list in 1883 and run in fixed steps over ranges (for example 0.008 in per gauge from 14 to 19 SWG and 0.004 in from 19 to 23 SWG). AWG, by contrast, follows d = 0.005 in × 92^((36 − n)/39).
Sources
- BS 3737:1964, Specification for the Imperial Standard Wire Gauge (withdrawn); diameters as legalised by the Board of Trade, 1883
- Engineering ToolBox: SWG, Standard Wire Gauge (inch and mm table)
- R. Rowlett, How Many? A Dictionary of Units of Measurement: wire gauges (UNC Chapel Hill)
- ASTM B258: AWG nominal diameters (for the nearest-AWG column)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.