M12 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M12 wire thread insert, drill 12.5 mm (0.4921 in), typical and tap with an M12 STI tap, pitch 1.75 mm (0.0689 in). Standard insert lengths are 12 mm (0.472 in), 18 mm (0.709 in), 24 mm (0.945 in), 30 mm (1.181 in) and 36 mm (1.417 in).

⌀Tap drill for STI tap (typical)
12.5 mm0.4921 in0.4921 in12.5 mm
PPitch
1.75 mm0.0689 in0.0689 in1.75 mm
1.5dInsert length 1.5d
18 mm0.709 in0.709 in18 mm
2dInsert length 2d
24 mm0.945 in0.945 in24 mm

Drawing

⌀12.5 mm⌀0.4921 in1.5d 18 mm1.5d 0.709 inTakes a standard M12 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M12 specifications

PPitch1.75 mm0.0689 in
⌀Tap drill for STI tap (typical)12.5 mm0.4921 in
1dInsert length 1d12 mm0.472 in
1.5dInsert length 1.5d18 mm0.709 in
2dInsert length 2d24 mm0.945 in
2.5dInsert length 2.5d30 mm1.181 in
3dInsert length 3d36 mm1.417 in

M12 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.