M14 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M14 wire thread insert, drill 14.5 mm (0.5709 in), typical and tap with an M14 STI tap, pitch 2 mm (0.0787 in). Standard insert lengths are 14 mm (0.551 in), 21 mm (0.827 in), 28 mm (1.102 in), 35 mm (1.378 in) and 42 mm (1.654 in).

⌀Tap drill for STI tap (typical)
14.5 mm0.5709 in0.5709 in14.5 mm
PPitch
2 mm0.0787 in0.0787 in2 mm
1.5dInsert length 1.5d
21 mm0.827 in0.827 in21 mm
2dInsert length 2d
28 mm1.102 in1.102 in28 mm

Drawing

⌀14.5 mm⌀0.5709 in1.5d 21 mm1.5d 0.827 inTakes a standard M14 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M14 specifications

PPitch2 mm0.0787 in
⌀Tap drill for STI tap (typical)14.5 mm0.5709 in
1dInsert length 1d14 mm0.551 in
1.5dInsert length 1.5d21 mm0.827 in
2dInsert length 2d28 mm1.102 in
2.5dInsert length 2.5d35 mm1.378 in
3dInsert length 3d42 mm1.654 in

M14 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.