M10 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M10 wire thread insert, drill 10.5 mm (0.4134 in), typical and tap with an M10 STI tap, pitch 1.5 mm (0.0591 in). Standard insert lengths are 10 mm (0.394 in), 15 mm (0.591 in), 20 mm (0.787 in), 25 mm (0.984 in) and 30 mm (1.181 in).

⌀Tap drill for STI tap (typical)
10.5 mm0.4134 in0.4134 in10.5 mm
PPitch
1.5 mm0.0591 in0.0591 in1.5 mm
1.5dInsert length 1.5d
15 mm0.591 in0.591 in15 mm
2dInsert length 2d
20 mm0.787 in0.787 in20 mm

Drawing

⌀10.5 mm⌀0.4134 in1.5d 15 mm1.5d 0.591 inTakes a standard M10 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M10 specifications

PPitch1.5 mm0.0591 in
⌀Tap drill for STI tap (typical)10.5 mm0.4134 in
1dInsert length 1d10 mm0.394 in
1.5dInsert length 1.5d15 mm0.591 in
2dInsert length 2d20 mm0.787 in
2.5dInsert length 2.5d25 mm0.984 in
3dInsert length 3d30 mm1.181 in

M10 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.