M16 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M16 wire thread insert, drill 16.5 mm (0.6496 in), typical and tap with an M16 STI tap, pitch 2 mm (0.0787 in). Standard insert lengths are 16 mm (0.630 in), 24 mm (0.945 in), 32 mm (1.260 in), 40 mm (1.575 in) and 48 mm (1.890 in).

⌀Tap drill for STI tap (typical)
16.5 mm0.6496 in0.6496 in16.5 mm
PPitch
2 mm0.0787 in0.0787 in2 mm
1.5dInsert length 1.5d
24 mm0.945 in0.945 in24 mm
2dInsert length 2d
32 mm1.260 in1.260 in32 mm

Drawing

⌀16.5 mm⌀0.6496 in1.5d 24 mm1.5d 0.945 inTakes a standard M16 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M16 specifications

PPitch2 mm0.0787 in
⌀Tap drill for STI tap (typical)16.5 mm0.6496 in
1dInsert length 1d16 mm0.630 in
1.5dInsert length 1.5d24 mm0.945 in
2dInsert length 2d32 mm1.260 in
2.5dInsert length 2.5d40 mm1.575 in
3dInsert length 3d48 mm1.890 in

M16 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.