M3 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M3 wire thread insert, drill 3.2 mm (0.1260 in), typical and tap with an M3 STI tap, pitch 0.5 mm (0.0197 in). Standard insert lengths are 3 mm (0.118 in), 4.5 mm (0.177 in), 6 mm (0.236 in), 7.5 mm (0.295 in) and 9 mm (0.354 in).

⌀Tap drill for STI tap (typical)
3.2 mm0.1260 in0.1260 in3.2 mm
PPitch
0.5 mm0.0197 in0.0197 in0.5 mm
1.5dInsert length 1.5d
4.5 mm0.177 in0.177 in4.5 mm
2dInsert length 2d
6 mm0.236 in0.236 in6 mm

Drawing

⌀3.2 mm⌀0.1260 in1.5d 4.5 mm1.5d 0.177 inTakes a standard M3 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M3 specifications

PPitch0.5 mm0.0197 in
⌀Tap drill for STI tap (typical)3.2 mm0.1260 in
1dInsert length 1d3 mm0.118 in
1.5dInsert length 1.5d4.5 mm0.177 in
2dInsert length 2d6 mm0.236 in
2.5dInsert length 2.5d7.5 mm0.295 in
3dInsert length 3d9 mm0.354 in

M3 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.