M4 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M4 wire thread insert, drill 4.2 mm (0.1654 in), typical and tap with an M4 STI tap, pitch 0.7 mm (0.0276 in). Standard insert lengths are 4 mm (0.157 in), 6 mm (0.236 in), 8 mm (0.315 in), 10 mm (0.394 in) and 12 mm (0.472 in).

⌀Tap drill for STI tap (typical)
4.2 mm0.1654 in0.1654 in4.2 mm
PPitch
0.7 mm0.0276 in0.0276 in0.7 mm
1.5dInsert length 1.5d
6 mm0.236 in0.236 in6 mm
2dInsert length 2d
8 mm0.315 in0.315 in8 mm

Drawing

⌀4.2 mm⌀0.1654 in1.5d 6 mm1.5d 0.236 inTakes a standard M4 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M4 specifications

PPitch0.7 mm0.0276 in
⌀Tap drill for STI tap (typical)4.2 mm0.1654 in
1dInsert length 1d4 mm0.157 in
1.5dInsert length 1.5d6 mm0.236 in
2dInsert length 2d8 mm0.315 in
2.5dInsert length 2.5d10 mm0.394 in
3dInsert length 3d12 mm0.472 in

M4 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.