M5 Helicoil Drill Size and Insert Lengths

Thread Inserts

For an M5 wire thread insert, drill 5.2 mm (0.2047 in), typical and tap with an M5 STI tap, pitch 0.8 mm (0.0315 in). Standard insert lengths are 5 mm (0.197 in), 7.5 mm (0.295 in), 10 mm (0.394 in), 12.5 mm (0.492 in) and 15 mm (0.591 in).

⌀Tap drill for STI tap (typical)
5.2 mm0.2047 in0.2047 in5.2 mm
PPitch
0.8 mm0.0315 in0.0315 in0.8 mm
1.5dInsert length 1.5d
7.5 mm0.295 in0.295 in7.5 mm
2dInsert length 2d
10 mm0.394 in0.394 in10 mm

Drawing

⌀5.2 mm⌀0.2047 in1.5d 7.5 mm1.5d 0.295 inTakes a standard M5 screw after installation
Section through an STI-tapped blind hole with a 1.5d insertDrawn to scale · Dimensions in mmDimensions in inches

M5 specifications

PPitch0.8 mm0.0315 in
⌀Tap drill for STI tap (typical)5.2 mm0.2047 in
1dInsert length 1d5 mm0.197 in
1.5dInsert length 1.5d7.5 mm0.295 in
2dInsert length 2d10 mm0.394 in
2.5dInsert length 2.5d12.5 mm0.492 in
3dInsert length 3d15 mm0.591 in

M5 in other charts

All Thread Inserts sizes

Compare all 13 sizes in the Thread Inserts chart →

Sources

  1. DIN 8140-1 / ISO 13431: Wire thread inserts for ISO metric screw threads
  2. Böllhoff: HELICOIL thread inserts, technical catalogue (STI tap drills, nominal lengths)
  3. Albany County Fasteners: HeliCoil thread repair sizing chart
  4. AmesWeb: Helicoil tap sizes (STI)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.